levo

CCEA AS Technology and Design, memorised in year one.

Everything the AS examines and nothing from the second year. Drill the 11 topics you are actually sitting in Northern Ireland this summer.

  • AS of 8900
  • 11 topics
  • 72 subtopics

What CCEA AS Technology and Design covers, and what it leaves out

CCEA AS Technology and Design is the first year of the 8900 course and a qualification in its own right, examined in 3 units, AS 1 Paper 1, AS 1 Paper 2 and AS 2. This page holds only what the AS examines: 11 topics across 72 subtopics, 1,125 active recall questions, starting with Material Selection and Wood, Metals and Plastics. The 4 topics kept back for the second year are not shown, so nothing here is content you have not been taught yet.

Starting the second year? The full CCEA A-Level Technology and Design page adds the A2 topics on top of everything here.

CCEA GCE Technology and Design, subject code 8900, qualification number 601/8367/6 (A level), first teaching September 2022. Read the CCEA specification ↗

How it is assessed

Unit AS 1

Design and Materials, with Systems and Control or Product Design

  • MATERIAL SELECTION AND WOOD
  • METALS
  • PLASTICS
  • COMPOSITE AND EMERGING MATERIALS
  • PROCESSING MATERIALS
  • PRODUCT ANALYSIS AND DESIGN COMMUNICATION
  • DESIGN FOR MANUFACTURE, QUALITY AND SAFETY
  • ELECTRONIC CONTROL SYSTEMS
  • MECHANICAL AND PNEUMATIC COMPONENTS
  • DESIGNING AND MANUFACTURING PRODUCTS

Unit AS 2

Product Development

  • PRODUCT DEVELOPMENT

The full specification

11 topics, 72 subtopics. Open any topic to see what is inside it.

01Material Selection and Wood6 subtopics
02Metals5 subtopics
03Plastics5 subtopics
04Composite and Emerging Materials4 subtopics
05Processing Materials6 subtopics
06Product Analysis and Design Communication6 subtopics

How you work through it

Pick the mode that fits the time you have.

Try three questions

No account needed. Answer from memory first.

Your recallNot started
Evaluation

Evaluate aluminium alloy as a material for the frame of a lightweight camping chair.

Numbers

A block of timber measures 200 mm × 100 mm × 50 mm and has a mass of 0.65 kg. Calculate its density.

Evaluation

State the main advantages of manufactured boards over solid timber.

Spaced Repetition Schedule

How reviews are timed

Levo will automatically distribute all of your progress into a spaced repetition calendar. Once you’ve answered, it’s scheduled for you on the next day in the spaced repetition schedule. Over time, the gaps between your recall get bigger, from a day to three years, reinforcing memorisation over a long period of time.

Interval sequence

  • 1 day
  • 3 days
  • 7 days
  • 14 days
  • 30 days
  • 60 days
  • 4 months
  • 8 months
  • 1 year
  • 2 years
  • 3 years

What is inside Levo

Six ways to work the same material

1Closed book
2Open book
3Closed book

The 3-step method, run for you

Answer cold, learn it, then prove it stuck. Levo tracks the jump between your first attempt and your last.

Material Selection and Wood
Metals
Plastics
Composite and Emerging Materials

Cram a whole paper in one sitting

Sort every topic into what you know and what you do not, then drill only the weak ones.

The output voltage is V.
356

Blank Blitz makes facts automatic

Rapid timed gap-fills on the terms and numbers you need to recall without thinking.

AThe total resistance is 2 kΩ.
BThe parallel pair gives (2 × 2) ÷ (2 + 2) = 1 kΩ.
CThe series resistor adds another 1 kΩ.

Build It gets the exam shape right

Assemble a full-mark answer from its marking points, in the order an examiner wants them.

Hazard means anything with the potential to cause harm.
TrueFalse

Test It catches misconceptions

Spot the fault in a statement. The traps are the mistakes students actually make.

721941163128510

Brain Breaks between sessions

Short focus games to reset attention, so the next set lands better than the last.

Technology and Design revision questions

Common questions about revising CCEA AS-Level Technology and Design. Tap any to open it.

What is on CCEA AS Technology and Design?

11 topics across 72 subtopics, examined in AS 1 Paper 1, AS 1 Paper 2 and AS 2. They are all listed on this page, and each one opens to the subtopics inside it. The full topic list is Material Selection and Wood, Metals, Plastics, Composite and Emerging Materials, Processing Materials, Product Analysis and Design Communication and more.

Does AS Technology and Design count towards the full A level?

Yes. In Northern Ireland the AS units are marked as a standalone AS qualification and also carry forward into the full CCEA A level, which is why the first year matters more here than it does in England. Check the current weighting on the 8900 specification, as it is set by the board rather than by us.

What is the difference between AS and A level Technology and Design?

AS is the first-year units only. The A level adds 4 further topics, among them Microelectronic Control Systems, Mechanical and Pneumatic Systems, Product Design in Industry and Society, and expects you to connect them back to the AS material. Work the AS content here, then move up to the full A level page when you start the second year.

When do you sit CCEA AS Technology and Design?

Normally at the end of Year 12, in the summer series. That gives you one year to memorise 1,125 questions' worth of material, which is roughly 6 questions a day across an academic year if you start in September.

How should you revise for AS Technology and Design?

By retrieval, not rereading. Cover the answer, pull it from memory, then check. Levo runs that loop across all 11 AS topics and brings each question back on a spaced schedule, so what you learn in September is still there in June.

Is it worth revising AS content again for the A level?

Yes, and it is the mistake most students make. The second-year papers assume the first year, and in Northern Ireland the AS marks usually count towards the final grade as well. Keeping the AS material on a spaced schedule through Year 13 costs far less time than relearning it.

How many questions are there for CCEA AS Technology and Design?

1,125, written from the 8900 subject content and grouped into 72 subtopics so you can work one small area at a time rather than a whole topic at once.

Can you use Levo for just the AS year?

Yes. Pick your subject, choose the AS topics on the topic screen, and every mode — the 3-step method, Cram, Blank Blitz, Build It and Test It — works only that material. Add the second-year topics when you get to them.

Every question in Technology and Design, on a schedule.

Attempt a question from memory, write the correct version, then attempt it again. Levo records the jump between your first attempt and your last, and brings each question back on the day you are due to forget it.

Or £46 a year, about £3.83 a month. Cancel anytime.