levo

Waves and Particle Nature of Light

Reflection, transmission and the pulse-echo principle

  • 1 thing to know
  • Papers 2 and 3

Overview

Recall questions on what happens at a boundary, why coupling gel is used, and the relationship a pulse-echo system uses to find a distance.

What you need to know

Answer each one before you reveal it.

Your recallNot started
Numbers

Why can a pulse-echo system not detect an object smaller than the wavelength, how does reflection at a fixed end differ from reflection at a free end, and what decides how much is reflected?

Questions from this subtopic

Each one with the model answer underneath.

  1. 1

    What happens to a wave when it arrives at a boundary between two different media?

    Model answer

    Part of the wave is reflected back into the first medium and part is transmitted into the second, with some energy usually absorbed as well.

  2. 2

    When a wave passes into a new medium, which of its properties stays the same and which change?

    Model answer

    The frequency stays the same because it is fixed by the source, while the speed and the wavelength both change.

  3. 3

    Why does the wavelength shorten when a wave is transmitted into a medium in which it travels more slowly?

    Model answer

    Since v = fλ and the frequency is unchanged, the wavelength must be proportional to the speed, so a lower speed gives a shorter wavelength.

  4. 4

    What determines how much of a wave's energy is reflected at a boundary rather than transmitted?

    Model answer

    It depends on how different the two media are; the greater the difference in their densities and wave speeds, the greater the fraction of energy reflected.

  5. 5

    Why is a gel smeared between an ultrasound transducer and a patient's skin?

    Model answer

    Air and skin are so different that almost all the ultrasound would be reflected at the surface, and the gel excludes the air so that the pulse is transmitted into the body.

  6. 6

    How does a wave pulse reflected from a fixed end of a rope differ from one reflected from a free end?

    Model answer

    Reflection at a fixed end inverts the pulse, giving a phase change of 180°, whereas reflection at a free end returns the pulse the same way up with no phase change.

Other ways to work this

The same content, four other ways.

What is inside Levo

Six ways to work the same material.

1Closed book
2Open book
3Closed book

The 3-step method, run for you

Answer cold, learn it, then prove it stuck. Levo tracks the jump between your first attempt and your last.

Working as a Physicist
Mechanics
Electric Circuits
Materials

Cram a whole paper in one sitting

Sort every topic into what you know and what you do not, then drill only the weak ones.

The gradient gives the .
accelerationvelocitydisplacement

Blank Blitz makes facts automatic

Rapid timed gap-fills on the terms and numbers you need to recall without thinking.

AThe equation is s = (u + v)t/2.
BThe equation is v = u + at.
CThe equation is s = ut + ½at².

Build It gets the exam shape right

Assemble a full-mark answer from its marking points, in the order an examiner wants them.

Speed means rate of change of distance.
TrueFalse

Test It catches misconceptions

Spot the fault in a statement. The traps are the mistakes students actually make.

721941163128510

Brain Breaks between sessions

Short focus games to reset attention, so the next set lands better than the last.

Every question in Waves and Particle Nature of Light, on a schedule.

Attempt a question from memory, write the correct version, then attempt it again. Levo records the jump between your first attempt and your last, and brings each question back on the day you are due to forget it.

Or £46 a year, about £3.83 a month. Cancel anytime.