OCR A-Level Physics B H557
Planning
Implementing
Analysis
Evaluation
Practical Skills
Use of Apparatus and Techniques
Fundamental Data Analysis
Imaging and Signalling
Sensing
Mechanical Properties of Materials
Waves and Quantum Behaviour
Space, Time and Motion
Creating Models
Out Into Space
Our Place in the Universe
Matter: Very Simple
Matter: Hot or Cold
Electromagnetism
Charge and Field
Probing Deep Into Matter
Ionising Radiation and Risk
Ionising Radiation and Risk
Investigating absorption and half-life
- 3 things to know
- Components 01, 02 and 03
Overview
Recall questions on investigating absorption with paper, aluminium and lead, measuring background, the results that identify alpha, beta and gamma radiation, keeping the distance fixed, long counting times and the √N uncertainty, safety with sealed sources, measuring the half-life of protactinium from a count rate graph or a logarithmic plot, and the sources of uncertainty.
What you need to know
Answer each one before you reveal it.
State two sources of uncertainty in a laboratory measurement of half-life.
In an absorption experiment, what result identifies the radiation as alpha?
Questions from this subtopic
Each one with the model answer underneath.
- 1
Describe how the absorption of radiation by different materials is investigated.
Model answer
A source is clamped a fixed distance from a Geiger-Müller tube, the count over a set time is recorded with nothing between them, and the measurement is repeated with sheets of paper, aluminium and lead placed in the gap.
- 2
Why is the background count measured before any source is brought out in an absorption experiment?
Model answer
The detector always registers background radiation, and that count must be subtracted from every reading so that the figures used describe only the radiation from the source.
- 3
In an absorption experiment, what result identifies the radiation as alpha?
Model answer
The corrected count rate falls essentially to zero when a single sheet of paper is placed between the source and the detector.
- 4
In an absorption experiment, what result identifies the radiation as beta?
Model answer
The corrected count rate is barely affected by paper but drops to nearly zero behind a few millimetres of aluminium.
- 5
In an absorption experiment, what result identifies the radiation as gamma?
Model answer
A substantial count rate remains after several millimetres of aluminium, and increasing thicknesses of lead reduce it progressively without ever removing it completely.
- 6
Why must the distance between source and detector be kept the same throughout an absorption experiment?
Model answer
The count rate falls with distance, so any change in separation would alter the reading and be mistaken for an effect of the absorber.
Other ways to work this
The same content, four other ways.
What is inside Levo
Six ways to work the same material.
Every question in Ionising Radiation and Risk, on a schedule.
Attempt a question from memory, write the correct version, then attempt it again. Levo records the jump between your first attempt and your last, and brings each question back on the day you are due to forget it.
Or £46 a year, about £3.83 a month. Cancel anytime.