levo

Sensing

Sensing circuits and calibration

  • 3 things to know
  • Components 01, 02 and 03

Overview

Recall questions on sensors, how thermistors and light-dependent resistors respond, potential dividers whose output rises or falls with temperature, calculating outputs with thermistors and light-dependent resistors, the sensitivity of a sensing circuit and choosing its fixed resistor, calibrating a thermistor circuit and why it needs a curve, and response time, resolution and thermal capacity.

What you need to know

Answer each one before you reveal it.

Your recallNot started
Key term

Describe how a thermistor sensing circuit would be calibrated.

Key term

What is a sensor in an electrical sensing circuit?

Key term

Describe a potential divider arrangement whose output rises as the temperature rises.

Questions from this subtopic

Each one with the model answer underneath.

  1. 1

    What is a sensor in an electrical sensing circuit?

    Model answer

    A component whose electrical property, usually its resistance, changes with a physical quantity such as temperature or light intensity.

  2. 2

    How does a negative temperature coefficient thermistor respond to a rise in temperature?

    Model answer

    Its resistance falls as the temperature rises.

  3. 3

    How does a light-dependent resistor respond to an increase in illumination?

    Model answer

    Its resistance falls as the light intensity increases.

  4. 4

    Describe a potential divider arrangement whose output rises as the temperature rises.

    Model answer

    Put the thermistor as the upper resistor and take the output across a fixed lower resistor; as the thermistor's resistance falls, the fixed resistor takes a larger share of the supply.

  5. 5

    Describe a potential divider arrangement whose output falls as the temperature rises.

    Model answer

    Put the fixed resistor above and take the output across the thermistor itself, so the output falls as the thermistor's resistance falls.

  6. 6

    A thermistor of resistance 4.0 kΩ is in series with a 2.0 kΩ fixed resistor across a 6.0 V supply. Calculate the potential difference across the fixed resistor.

    Model answer

    V = 6.0 × 2.0/6.0 = 2.0 V.

Other ways to work this

The same content, four other ways.

What is inside Levo

Six ways to work the same material.

1Closed book
2Open book
3Closed book

The 3-step method, run for you

Answer cold, learn it, then prove it stuck. Levo tracks the jump between your first attempt and your last.

Planning
Implementing
Analysis
Evaluation

Cram a whole paper in one sitting

Sort every topic into what you know and what you do not, then drill only the weak ones.

The two charges .
attractrepelcombine

Blank Blitz makes facts automatic

Rapid timed gap-fills on the terms and numbers you need to recall without thinking.

AThe neutron has lepton number 0.
BOn the other side the proton has 0.
CThe electron has +1 and the antineutrino has −1.

Build It gets the exam shape right

Assemble a full-mark answer from its marking points, in the order an examiner wants them.

There are 2π rad in a full circle.
TrueFalse

Test It catches misconceptions

Spot the fault in a statement. The traps are the mistakes students actually make.

721941163128510

Brain Breaks between sessions

Short focus games to reset attention, so the next set lands better than the last.

Every question in Sensing, on a schedule.

Attempt a question from memory, write the correct version, then attempt it again. Levo records the jump between your first attempt and your last, and brings each question back on the day you are due to forget it.

Or £46 a year, about £3.83 a month. Cancel anytime.