levo

Use of Apparatus and Techniques

Signal generators, oscilloscopes and generating waves

  • 3 things to know
  • Components 01, 02 and 03

Overview

Recall questions on what a signal generator supplies, the time-base and volts-per-division controls, reading frequency and peak voltage from a trace, and measuring wavelengths of sound, water waves and microwaves.

What you need to know

Answer each one before you reveal it.

Your recallNot started
Numbers

One complete cycle of a trace occupies 4.0 divisions with the time-base at 5.0 ms per division. Calculate the frequency of the signal.

Key term

A trace reaches 3.0 divisions above the centre line with the vertical sensitivity at 2.0 V per division. State the peak voltage.

Key term

A trace spans 6.0 divisions from its lowest to its highest point at 0.5 V per division. State the peak-to-peak and peak voltages.

Questions from this subtopic

Each one with the model answer underneath.

  1. 1

    What does a signal generator supply to a circuit?

    Model answer

    It supplies an alternating output whose frequency, amplitude and waveform can each be set by the user.

  2. 2

    What does the time-base control of an oscilloscope set?

    Model answer

    It sets the horizontal scale of the trace, in time per division.

  3. 3

    What does the volts per division control of an oscilloscope set?

    Model answer

    It sets the vertical scale of the trace, so that a given number of divisions of vertical deflection corresponds to a known potential difference.

  4. 4

    One complete cycle of a trace occupies 4.0 divisions with the time-base at 5.0 ms per division. Calculate the frequency of the signal.

    Model answer

    The period is 4.0 × 5.0 = 20 ms, so the frequency is 1 ÷ 0.020 = 50 Hz.

  5. 5

    A trace reaches 3.0 divisions above the centre line with the vertical sensitivity at 2.0 V per division. State the peak voltage.

    Model answer

    The peak voltage is 3.0 × 2.0 = 6.0 V.

  6. 6

    A trace spans 6.0 divisions from its lowest to its highest point at 0.5 V per division. State the peak-to-peak and peak voltages.

    Model answer

    The peak-to-peak voltage is 3.0 V and the peak voltage is 1.5 V.

Other ways to work this

The same content, four other ways.

What is inside Levo

Six ways to work the same material.

1Closed book
2Open book
3Closed book

The 3-step method, run for you

Answer cold, learn it, then prove it stuck. Levo tracks the jump between your first attempt and your last.

Planning
Implementing
Analysis
Evaluation

Cram a whole paper in one sitting

Sort every topic into what you know and what you do not, then drill only the weak ones.

The two charges .
attractrepelcombine

Blank Blitz makes facts automatic

Rapid timed gap-fills on the terms and numbers you need to recall without thinking.

AThe neutron has lepton number 0.
BOn the other side the proton has 0.
CThe electron has +1 and the antineutrino has −1.

Build It gets the exam shape right

Assemble a full-mark answer from its marking points, in the order an examiner wants them.

There are 2π rad in a full circle.
TrueFalse

Test It catches misconceptions

Spot the fault in a statement. The traps are the mistakes students actually make.

721941163128510

Brain Breaks between sessions

Short focus games to reset attention, so the next set lands better than the last.

Every question in Use of Apparatus and Techniques, on a schedule.

Attempt a question from memory, write the correct version, then attempt it again. Levo records the jump between your first attempt and your last, and brings each question back on the day you are due to forget it.

Or £46 a year, about £3.83 a month. Cancel anytime.