OCR A-Level Physics B H557
Planning
Implementing
Analysis
Evaluation
Practical Skills
Use of Apparatus and Techniques
Fundamental Data Analysis
Imaging and Signalling
Sensing
Mechanical Properties of Materials
Waves and Quantum Behaviour
Space, Time and Motion
Creating Models
Out Into Space
Our Place in the Universe
Matter: Very Simple
Matter: Hot or Cold
Electromagnetism
Charge and Field
Probing Deep Into Matter
Ionising Radiation and Risk
Mechanical Properties of Materials
Direct evidence for the size and spacing of particles
- 3 things to know
- Components 01, 02 and 03
Overview
Recall questions on scanning tunnelling microscope images and how the microscope works, why the tunnelling current is so sensitive to the gap, the atomic spacing it shows, Rayleigh's oil drop experiment and its single-layer assumption, calculating film thickness, measuring the drop and the patch, its errors and upper estimate, and why particle size matters for materials.
What you need to know
Answer each one before you reveal it.
Why can a scanning tunnelling microscope only be used on conducting or semiconducting samples?
Describe Rayleigh's oil drop experiment.
Questions from this subtopic
Each one with the model answer underneath.
- 1
What does an image from a scanning tunnelling microscope show?
Model answer
It shows individual atoms on the surface of a conducting sample, appearing as a regular array of bumps.
- 2
Outline how a scanning tunnelling microscope works.
Model answer
A very fine conducting tip is brought within about a nanometre of the surface, electrons tunnel across the gap, and the tunnelling current is recorded as the tip is scanned to build up a map of the surface.
- 3
Why is the tunnelling current so sensitive to the width of the gap?
Model answer
It falls off extremely rapidly with distance, so a change of the order of one atomic diameter alters the current greatly.
- 4
What order of magnitude for the spacing of atoms does a scanning tunnelling microscope image give?
Model answer
About 10⁻¹⁰ m, a few tenths of a nanometre.
- 5
Why can a scanning tunnelling microscope only be used on conducting or semiconducting samples?
Model answer
A current has to flow between the tip and the sample for the tunnelling current to be measured.
- 6
Describe Rayleigh's oil drop experiment.
Model answer
A drop of oil of known volume is placed on a clean water surface lightly dusted with powder, and the drop spreads into a circular patch whose diameter is measured.
Other ways to work this
The same content, four other ways.
What is inside Levo
Six ways to work the same material.
Every question in Mechanical Properties of Materials, on a schedule.
Attempt a question from memory, write the correct version, then attempt it again. Levo records the jump between your first attempt and your last, and brings each question back on the day you are due to forget it.
Or £46 a year, about £3.83 a month. Cancel anytime.