levo

Electromagnetic Induction

The rotating coil and the a.c. generator

  • 3 things to know
  • Component 3

Overview

Recall questions on the construction and the role of slip rings, why rotating the coil induces an alternating electromotive force, the peak value NBAω, where in the rotation the emf is greatest and where zero, and why the emf is zero when the flux linkage is greatest.

What you need to know

Answer each one before you reveal it.

Your recallNot started
Key term

In which position of a rotating coil is the induced emf zero?

Key term

How is the alternating emf of a rotating coil taken off to an external circuit?

Key term

Why is the emf of a rotating coil greatest exactly where the flux linkage is zero?

Questions from this subtopic

Each one with the model answer underneath.

  1. 1

    Describe how the flux linkage of a coil changes as it rotates steadily in a uniform magnetic field.

    Model answer

    The flux linkage varies sinusoidally between a maximum one way and an equal maximum the other. It is greatest when the plane of the coil is at right angles to the field and zero when the plane contains the field.

  2. 2

    In which position of a rotating coil is the induced emf greatest?

    Model answer

    The emf is greatest when the plane of the coil lies along the field, so the flux linkage is momentarily zero. That is the position where the flux linkage is changing fastest as the coil turns.

  3. 3

    In which position of a rotating coil is the induced emf zero?

    Model answer

    The emf is zero when the plane of the coil is at right angles to the field, so the flux linkage is at its maximum. At a maximum the flux linkage is momentarily not changing.

  4. 4

    Why is the emf of a rotating coil greatest exactly where the flux linkage is zero?

    Model answer

    The emf depends on the rate of change of flux linkage, not on the flux linkage itself. A sinusoidal flux linkage has its steepest gradient as it passes through zero.

  5. 5

    How does the peak emf of a rotating coil depend on the flux density?

    Model answer

    The peak emf is directly proportional to the flux density. Doubling B doubles the flux linkage at every angle and so doubles its rate of change.

  6. 6

    How does the peak emf of a rotating coil depend on the area of the coil?

    Model answer

    The peak emf is directly proportional to the area of the coil. A larger area gives a proportionately larger flux for the same field.

Other ways to work this

The same content, four other ways.

What is inside Levo

Six ways to work the same material.

1Closed book
2Open book
3Closed book

The 3-step method, run for you

Answer cold, learn it, then prove it stuck. Levo tracks the jump between your first attempt and your last.

Basic Physics
Kinematics
Dynamics
Energy Concepts

Cram a whole paper in one sitting

Sort every topic into what you know and what you do not, then drill only the weak ones.

The wires .
attractrepeltwist

Blank Blitz makes facts automatic

Rapid timed gap-fills on the terms and numbers you need to recall without thinking.

AThe equation is pV = NkT.
BThe pressure, p, is in Pa.
CThe volume V is in m³.

Build It gets the exam shape right

Assemble a full-mark answer from its marking points, in the order an examiner wants them.

The joule is a unit of energy.
TrueFalse

Test It catches misconceptions

Spot the fault in a statement. The traps are the mistakes students actually make.

721941163128510

Brain Breaks between sessions

Short focus games to reset attention, so the next set lands better than the last.

Every question in Electromagnetic Induction, on a schedule.

Attempt a question from memory, write the correct version, then attempt it again. Levo records the jump between your first attempt and your last, and brings each question back on the day you are due to forget it.

Or £46 a year, about £3.83 a month. Cancel anytime.